Dallas Dance Music - Dallas nightlife, music, tickets, and more - View Single Post

MeThoD · 07-22-02, 07:03 PM

Get a new #2 pencil, and take the eraser and lightly rub off the carbon build up on both the needle and the tone arm. When doing the tone arm make sure to blow out any eraser shardes that may have been left. Now this is a method I use successfully most of the time when a customers decks are only working out of one side. If the problem persists, look at the contacts in the arm and make sure one or more of the contacts have not been pushed in to far and no longer making contact (new tone arm needed).And yet if the problem still persists, pm me or call me at 214-358-2623 and ask for Brett. I've got some other tricks, but can not disclose for I would have to kill all on this board.Bawhhahahahaahhaaa. For real though if the bitch don't wanna work, bring it to me.

07-22-02, 07:03 PM	#7 (permalink)
MeThoD Join Date: Apr 2002 Location: is where you iz! Posts: 486	Get a new #2 pencil, and take the eraser and lightly rub off the carbon build up on both the needle and the tone arm. When doing the tone arm make sure to blow out any eraser shardes that may have been left. Now this is a method I use successfully most of the time when a customers decks are only working out of one side. If the problem persists, look at the contacts in the arm and make sure one or more of the contacts have not been pushed in to far and no longer making contact (new tone arm needed).And yet if the problem still persists, pm me or call me at 214-358-2623 and ask for Brett. I've got some other tricks, but can not disclose for I would have to kill all on this board.Bawhhahahahaahhaaa. For real though if the bitch don't wanna work, bring it to me.