REASON Help? - Dallas Dance Music - Dallas nightlife, music, tickets, and more

04-02-02, 06:07 PM

I have some tracks laid out in Reason, but i haven't figured out how to use the track window at the bottom. Does it work like Acid in the sense that i can lay out my drums, then synth, sampler, etc... If so, how do i assign it to play from the layout and to not just play the loop? Any help would be appreciated?

Phantori
The Underground Vault

04-02-02, 06:09 PM

RIGHT CLICK ON DA DRUM MACHINE & HIT 'COPY PATTERN TO TRACK..'. THIS TAKES THE PATTERN & TRANSLATEZ IT TO DA BOTTEM OF DA PAGE. AFTER DAT U CAN SEQUENCE IT BELOW.

KiloWatts · 04-02-02, 06:39 PM

yeah, I'm not a big fan of the drum pattern sequencer... it's too hard to manipulate...

I'd just enter each note in manually, or do what tha rave slave *smirk* said.

04-02-02, 08:59 PM

Thanks for your help, I knew that it had to work as a sequencer but wasn't getting very far in that respect.

Thanks again,

Phantori
The Underground Vault

04-03-02, 11:29 AM

the reason sequencer is my favorite software sequencer - give the "sequencer" section in the PDF manual a read (its under Start->Programs->Propellerheads->Reason)Its a short read and explains things well.

I'm currently fighting with cubase. If only Reason could sequence external synths!

jens · 04-04-02, 02:21 PM

hey
have you tried sequencing Reason FROM Cubase??

hint- Rewire

J

KiloWatts · 04-04-02, 03:34 PM

I think ReWire 2.0 will allow Cubase to be run as a slave to Reason.

04-04-02, 05:42 PM

i want to use REASON's sequencer, not cubases. i like reason's sequencer. is rewire 2.0 a separate component from reason, or is it integral to reason 2.0?

its not a huge deal anyway. i got a cubase book, so its just a matter of time till i get my head around it.

04-02-02, 06:07 PM	#1 (permalink)
DJ_Phantori Guest Posts: n/a	REASON Help? I have some tracks laid out in Reason, but i haven't figured out how to use the track window at the bottom. Does it work like Acid in the sense that i can lay out my drums, then synth, sampler, etc... If so, how do i assign it to play from the layout and to not just play the loop? Any help would be appreciated? Phantori The Underground Vault

04-02-02, 06:39 PM	#3 (permalink)
KiloWatts Join Date: Jul 2001 Location: Philadelphia, PA Posts: 1,499	yeah, I'm not a big fan of the drum pattern sequencer... it's too hard to manipulate... I'd just enter each note in manually, or do what tha rave slave smirk said. __________________ « Artificial Music Machine t Diffusion Records C Harmonious Discord Recordings ~ KiloWatts Music

04-02-02, 08:59 PM	#4 (permalink)
DJ_Phantori Guest Posts: n/a	Thanks!!! Thanks for your help, I knew that it had to work as a sequencer but wasn't getting very far in that respect. Thanks again, Phantori The Underground Vault

04-04-02, 03:34 PM	#7 (permalink)
KiloWatts Join Date: Jul 2001 Location: Philadelphia, PA Posts: 1,499	I think ReWire 2.0 will allow Cubase to be run as a slave to Reason. __________________ « Artificial Music Machine t Diffusion Records C Harmonious Discord Recordings ~ KiloWatts Music

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

night-lifestyle sites clubplanet wantickets newyears nochelatina cooljunkie

04-02-02, 06:09 PM	#2 (permalink)
Da RAVE SLAVE Guest Posts: n/a	RIGHT CLICK ON DA DRUM MACHINE & HIT 'COPY PATTERN TO TRACK..'. THIS TAKES THE PATTERN & TRANSLATEZ IT TO DA BOTTEM OF DA PAGE. AFTER DAT U CAN SEQUENCE IT BELOW.

04-03-02, 11:29 AM	#5 (permalink)
deceptakahn Guest Posts: n/a	the reason sequencer is my favorite software sequencer - give the "sequencer" section in the PDF manual a read (its under Start->Programs->Propellerheads->Reason)Its a short read and explains things well. I'm currently fighting with cubase. If only Reason could sequence external synths!

04-04-02, 02:21 PM	#6 (permalink)
jens Join Date: Mar 2002 Location: The Kingdom of Bushnia Posts: 355	hey have you tried sequencing Reason FROM Cubase?? hint- Rewire J

04-04-02, 05:42 PM	#8 (permalink)
deceptakahn Guest Posts: n/a	i want to use REASON's sequencer, not cubases. i like reason's sequencer. is rewire 2.0 a separate component from reason, or is it integral to reason 2.0? its not a huge deal anyway. i got a cubase book, so its just a matter of time till i get my head around it.